Press and hold the (power) PAIRING button until you hear the voice guidance and the (Bluetooth) indicator begins to flash quickly. The speaker enters pairing mode. Perform the pairing procedure on the Bluetooth source device to detect the speaker. NOTE: Complete pairing operations of the source device within 5 minutes.
Why is my speaker not pairing?
If your Bluetooth devices won’t connect, it’s likely because the devices are out of range, or aren’t in pairing mode. If you’re having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet “forget” the connection.
How do I get my iPhone to pair with my speaker?
How to connect your iPhone to a Bluetooth speaker:
- Open Settings.
- Select “Bluetooth.”
- Make sure your iPhone’s Bluetooth is on.
- Make your speaker available to pair.
- Find your speaker under “Other Devices” on iPhone, and tap it to connect.
Why won’t my Bluetooth speaker pair up?
One way to remedy this is to open your iPhone or Android phone’s Bluetooth settings menu and to navigate to the list of saved devices. Once you’ve found it, remove your speaker from the list and head back to step #3 and use the speaker’s Bluetooth button to make it discoverable again.
Where do I find pairing mode?
Pair your device with a Bluetooth accessory
- On your device, go to Settings > Bluetooth and turn on Bluetooth.
- Place your accessory in discovery mode and wait for it to appear on your device.
- To pair, tap your accessory name when it appears onscreen.
What is device pairing mode?
Pairing is the process required to mutually register the information on BLUETOOTH devices to be connected wirelessly. It is necessary to pair BLUETOOTH devices to establish a BLUETOOTH connection.
Why can’t I pair my phone to my speaker?
Make sure that your Bluetooth accessory and iOS or iPadOS device are close to each other. Turn your Bluetooth accessory off and back on again. Make sure that your Bluetooth accessory is on and fully charged or connected to power. If your accessory uses batteries, see if they need to be replaced.
How do I force my Bluetooth speaker to connect?
What you can do about Bluetooth pairing failures
- Make sure Bluetooth is turned on.
- Determine which pairing process your device employs.
- Turn on discoverable mode.
- Make sure the two devices are in close enough proximity to one another.
- Power the devices off and back on.
- Remove old Bluetooth connections.
How do I reset my Bluetooth speaker?
With most Bluetooth speakers, you should only have to do so for a few seconds. For just about every Bluetooth speaker out there, pressing and holding the power button and Bluetooth button simultaneously will force the speaker to reset.
Where are the speaker settings on iPhone?
Go to Settings > Sounds (or Settings > Sounds & Haptics), and drag the Ringer and Alerts slider back and forth a few times. If you don’t hear any sound, or if your speaker button on the Ringer and Alerts slider is dimmed, your speaker might need service.
How do I fix the Bluetooth pairing problem?
Try unpairing, then re-pairing, the device. To unpair a device, select Start , then select Settings > Devices > Bluetooth & other devices . Select the Bluetooth device that’s paired but not working, then select Remove device > Yes. After that, pair the device again.
How do I switch my iPhone to Bluetooth speaker?
Here’s how:
- Open the Control Center.
- Touch and hold the network settings card on the top left of your control center with four icons in it.
- Now, touch and hold the Bluetooth icon.
- This will reveal your device options.
- To switch devices, locate the name of the device you want to switch to on the list.
How do I know if my Bluetooth speaker is in pairing mode?
Put your Bluetooth speaker into pairing mode.
In most cases, you’ll have to press (or press-and-hold) a button on the speaker until you hear a sound or see a light flash. If the speaker is battery-powered, make sure the batteries are charged before attempting to pair.
How do I reset my speaker settings?
Here’s how: In the search box on the taskbar, type control panel, then select it from the results. Select Hardware and Sound from the Control Panel, and then select Sound. On the Playback tab, select and hold (or right-click) the listing for your audio device, select Set as Default Device, and then select OK.
How do you restart a speaker?
There are two ways to reboot your speaker or display.
Unplug your speaker or display
- Unplug the power cord from your speaker or display.
- Leave it unplugged for one minute.
- Plug the power cord back in.
How do I reset my wireless Bluetooth?
Bluetooth Headsets: How to Reset the Connection
- Delete the headset from your cell phone’s list of paired devices.
- Once deleted, power your phone completely off, then power it back on. This resets the Bluetooth stack in the Bluetooth software on the phone.
- Re-pair the headset with your phone.
Where can I find speaker settings on my phone?
Change other sounds & vibrations
- Open your phone’s Settings app.
- Tap Sound & vibration. Default notification sound.
- Choose a sound.
- Tap Save.
Where do I find speaker settings?
In Control Panel, double-click the Sounds and Audio Devices icon. On the Audio tab, select a device from the Sound Playback list. Select the Advanced button. Select the Speakers tab.
Where did my speaker icon go on iPhone?
How can I retrieve the speaker phone icon to the keypad? Answer: A: Answer: A: Settings-General-Keyboards and see if Enable Dication is toggled on.
How do I get my phone to pair with my speaker?
Step 1: Pair a Bluetooth accessory
- Swipe down from the top of the screen.
- Touch and hold Bluetooth .
- Tap Pair new device. If you don’t find Pair new device, check under “Available devices” or tap More. Refresh.
- Tap the name of the Bluetooth device you want to pair with your device.
- Follow any on-screen instructions.
Why wont my iPhone connect to my car speakers?
Restart your device and your car. Make sure that your device is unlocked and on the Home screen. If possible, try to connect using another cable or USB port. Check the manual that came with your car to learn how to connect an Apple device.