If your Bluetooth devices won’t connect, it’s likely because the devices are out of range, or aren’t in pairing mode. If you’re having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet “forget” the connection.
Why isn’t my Bluetooth picking up my speaker?
Make sure that your Bluetooth accessory and iOS or iPadOS device are close to each other. Turn your Bluetooth accessory off and back on again. Make sure that your Bluetooth accessory is on and fully charged or connected to power. If your accessory uses batteries, see if they need to be replaced.
How do I fix the Bluetooth pairing problem?
Step 1: Check Bluetooth basics
- Turn Bluetooth off and then on again. Learn how to turn Bluetooth on and off.
- Confirm that your devices are paired and connected. Learn how to pair and connect via Bluetooth.
- Restart your devices. Learn how to restart your Pixel phone or Nexus device.
How do I force my Bluetooth speaker to connect?
What you can do about Bluetooth pairing failures
- Make sure Bluetooth is turned on.
- Determine which pairing process your device employs.
- Turn on discoverable mode.
- Make sure the two devices are in close enough proximity to one another.
- Power the devices off and back on.
- Remove old Bluetooth connections.
How do you reset a Bluetooth speaker?
With most Bluetooth speakers, you should only have to do so for a few seconds. For just about every Bluetooth speaker out there, pressing and holding the power button and Bluetooth button simultaneously will force the speaker to reset.
What do you do if your speakers aren’t pairing?
Speaker information is saved on the source device
- Delete the speaker information from your Bluetooth device.
- Connect the speaker to a Wi-Fi® network.
- Press and hold the PAIRING / button to set it to Bluetooth pairing mode.
- Perform the pairing operations on the Bluetooth source device to detect the speaker.
How do I get my speaker in pairing mode?
Bluetooth Speaker pairing procedure
- Turn on the speaker.
- Press and hold the (power) PAIRING button until you hear the voice guidance and the (Bluetooth) indicator begins to flash quickly.
- Perform the pairing procedure on the Bluetooth source device to detect the speaker.
Why is my Bluetooth not finding devices?
If your Bluetooth devices won’t connect, it’s likely because the devices are out of range, or aren’t in pairing mode. If you’re having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet “forget” the connection.
How do I restart my Bluetooth?
How to enable and restart Bluetooth on your phone (Android)
- Tap on Settings on your Android device.
- Look for Bluetooth or the Bluetooth symbol in your settings and tap it.
- There should be an option to enable. Please tap or swipe on it so that is in the On position. To restart Bluetooth, toggle Off then On.
How do I know if my speaker is in pairing mode?
Press and hold the (power) PAIRING button until you hear the voice guidance and the (Bluetooth) indicator begins to flash quickly. The speaker enters pairing mode.
How do you refresh Bluetooth?
To do this on your Android device:
- Open Settings, and then tap Apps.
- Tap the Sort icon (the down arrow with three vertical bars), then tap Show system apps.
- Tap OK and all the system apps will appear in the list.
- Tap Bluetooth > Storage > Clear data.
- Tap OK to confirm.
How do I pair speaker to my iPhone?
How to connect your iPhone to a Bluetooth speaker:
- Open Settings.
- Select “Bluetooth.”
- Make sure your iPhone’s Bluetooth is on.
- Make your speaker available to pair.
- Find your speaker under “Other Devices” on iPhone, and tap it to connect.
What happens if you reset Bluetooth?
Similar to Wi-Fi connections, your Bluetooth connections will be also be removed. That is, resetting network settings will forget all the paired Bluetooth devices. You will have to pair them again manually.
How do you factory reset your speaker?
On the back of your device, press and hold the microphone mute button for about 15 seconds. Your Google Home will let you know that it’s resetting. to factory reset Google Home.
How do I reset my sound speaker?
Here’s how: In the search box on the taskbar, type control panel, then select it from the results. Select Hardware and Sound from the Control Panel, and then select Sound. On the Playback tab, select and hold (or right-click) the listing for your audio device, select Set as Default Device, and then select OK.
How can I reset my Bluetooth speaker and remove all paired Bluetooth devices?
Delete Paired Bluetooth Connection – Android
- From a Home screen, do one of the following to ensure Bluetooth® is turned on from your Android™ device: Navigate: Settings. Connected devices. Connection preferences. Bluetooth. . Navigate:
- Tap the appropriate device name or the. Settings icon. (right).
- Tap ‘Forget’ or ‘Unpair’.
How do you restart a speaker?
There are two ways to reboot your speaker or display.
Unplug your speaker or display
- Unplug the power cord from your speaker or display.
- Leave it unplugged for one minute.
- Plug the power cord back in.