Generally speaking, if the clock has a single hole, that hole controls the main time spring. If there are two holes, one is for the time spring and one is for the hourly chime. Some clocks also have a third hole, which governs the quarter-hour chime tones.
https://youtube.com/watch?v=BkBtwmXZ1X8
Why does my clock have 3 winding holes?
Three Winding Holes
The hole in the middle, near the ‘6’ powers the time train which makes the clock keep time. The hole to the right powers the quarter-hour chiming and the hole on the left powers the striking at the top of the hour.
How often do you wind a 3 hole clock?
every seven days
We recommend winding a mantel clock every seven days, partially to be safe and partially because it’s easier to keep a weekly schedule. Wind the clock at approximately the same time of day each time.
What are the three winders on a grandfather clock?
Each winding point operates a particular set of gears. According to Tick Tock Tony, the clock will have at least one and up to three winding points: one for keeping time and perhaps one for chiming on the hour and one for chiming on the quarter-hour.
How do I get my clock to chime on the hour?
Turn the minute hand forward to the next hour. When striking stops, push up (or pull down on some clocks) the little wire hanging beneath the dial and let the clock strike. Each time you push (or pull) the wire, the clocks will strike the next hour. Repeat until the correct hour is struck.
How do you wind a clock with 3 winding points?
If your clock has winding points you will need to wind each point using a winding crank or key. To wind, simply insert the crank into the winding point turning clockwise approximately thirteen revolutions. As you turn the crank you should see the weight rise.
What is a triple chime clock?
Triple chime refers to clocks that play a choice of three different melodies. The most common triple chime melodies are Westminster, St. Michaels, and Whittington.
Can you Overwind a clock?
Often, one sees clocks advertised on Ebay and elsewhere as “not running, probably overwound.” The fact is, there is no way to overwind a clock. Specifically, if a clock is wound fully, eventually the winding key will no longer turn.
What does 3 30look like on a clock?
3:30 looks like this:
The short hand points at a little past 3, the long hand points to 6. ?The short hand tells us that the hour is 3. ?The long hand tells us that it’s 30 minutes after 3. 3:30 is between 3:00 and 4:00.
Can you over wind a wind up clock?
Luckily, the truth is that you can’t over-wind your clock. Over-winding is basically a myth! Let’s take a look at what actually causes a clock to quit running or chiming after winding it up… A clock mainspring is made of spring steel and is about the width of a ruler (but not quite as thick).
What is the difference between a grandmother and a grandfather clock?
What is the difference between a grandmother and a grandfather clock? Both grandmother and grandfather clocks are long case pendulum clocks, but grandfather clocks are generally taller than grandmother clocks, measuring in between 6 and 7 feet, while grandmother clocks typically measure between 5 and 6 feet.
Which side does the heaviest weight go on a grandfather clock?
right hand
To start with, the heaviest weight should be put on the going train side. This is the right hand side as you face the clock. This applies particularly to clocks which have a rolling moon or automatum mechanism.
What happens if you wind a grandfather clock backwards?
Since these clocks have a chiming mechanism to sound the quarter hour and “gong” on the hour, they must be in sync with the timing movement’s gears. Turning the hands backwards will throw the chime and mechanism off. This happened to my grandfather clock.
Can you turn clock hands backwards?
The truth is, some mechanical clocks cannot be set backwards, but most actually can! So why is this such a common misconception? Many of the American clocks made around the turn of the century were the kind that you can’t turn backwards.
What causes a clock not to chime?
Chime is off/will not chime: Ensure that the chime is not in the “OFF” position. If this does not solve the problem, replace the batteries. The clock chimes several minutes before the hour when the hands are moved manually: This is normal. The clocks will chime on the hour under normal operation.
Why does my clock chime 13 times?
After the twelfth hour with the twelve rings of the bell, the next hour should be with one ring only, indicating 1 o’clock plus twelve hours. Accordingly, with very rare exceptions, when a clock rings thirteen times it is indicating an impossible time and that the clock is not functioning correctly.
At what angle does the clock strikes 3?
At 3:00, the hands of the clock form a right angle of 90 degrees.
How often should I wind up my clock?
An eight-day clock should be wound once a week, as the mainspring loses power after seven days. A 30-hour clock should be wound daily; a good routine is to wind it every night before bedtime.
Do all wind up clocks tick?
Clocks make a ticking noise as their mechanism counts out the seconds. This is hardly new information, as all clocks tick. Old-fashioned wall clocks tick very loudly, but this is because their mechanisms are heavy and designed to be longer lasting than modern clocks.
What is a coffin clock?
Description. The Grandfather Coffin Clock (as the name implies) would have been a grandfather clock made out of a coffin. In Rolly Crump’s concept art the clock’s face had a devil-like face in it’s centre with the clock-hands being replaced by skeleton hands.
What is a dementia clock?
Dementia clocks generally display information such as letters and numbers on a highly visible round face. Reminders of time, day and date are usually included, and some models feature add-ons such as large calendars and LED digital displays.