Do Bigger Wheels Make It Harder To Skate?

Skateboard wheel size matters a lot. If the wheels are too big you’ll have a hard time landing tricks and the wheels might come into contact with your board. On average you should pick wheels between 52 and 54 millimeters depending on what and where you skate.

Are Bigger wheels easier for skateboard?

Wheel diameter also affects how quickly you accelerate and how tightly you can turn. Smaller wheels result in a slower ride, whereas larger wheels result in a faster one. And because they’re lower to the ground and typically easier to control, smaller wheels are ideal for technical or street skating.

Are bigger or smaller wheels better for skateboarding?

Wheel Diameter
Smaller wheels are lighter, weigh less, and give you a quicker, more responsive pop, which is good for street and technical skating. Bigger wheels are heavier, but roll faster and retain speed better, especially on rough surfaces. This makes them great for bowl skating and transportation.

What size wheels do most pro skaters use?

Large Wheels 58 – 62mm wheels
These wheels are the biggest in the standard street and park wheel range. Generally used by very well seasoned skateboarders and the preferred size for many bowl and vert ramp skaters.

What size wheels does Tony Hawk Ride?

53-56mm
53-56mm The 53-56mm wheels are the more common wheel size for beginners or bigger riders skating street, skate parks, bowls and vert ramps.

Is it harder to Ollie with bigger wheels?

If the wheels are too big you’ll have a hard time landing tricks and the wheels might come into contact with your board.

Is it better to skate loose or tight?

When talking about skateboard truck tightness, keeping the truck tight is recommended for beginners because it is easier to handle the skateboard this way. Tighter trucks can also do greater ollies, since you have more control over your board. On the other hand, loose trucks land better than tighter trucks.

Is a 7.5 or 8 skateboard better?

7.00″ to 7.50″: Narrow decks ideal for youth riders. 7.50″ to 8.00″: Medium deck width for teen or adult riders skating street terrain or doing more technical tricks. 8.00″ to 8.50″: Ideal for various street and transition terrain.

What size wheels should I get for a 8.25 deck?

FIND THE RIGHT SIZE SKATE PARTS

Deck Size truck Size Wheel Size
8.0 7.75 – 8.25 Axles 50 – 54 mm
8.125 8.0 – 8.25 AXLES 50 – 54 mm
8.25 8.0 – 8.5 axles 52 – 55 mm
8.375 8.25 – 8.5 axles 52 – 55 mm

What size wheels are good for skating?

between 52-54mm
Wheel Size
The most popular street skating wheel sizes are between 52-54mm. A larger wheel helps you skate rougher ground and ride up transitions easier. You can still skate street with larger wheels, but it will result in your skateboard feeling heavier.

Is there a benefit to bigger wheels?

Simply put, the larger your tire, the more of a grip your vehicle has on the road. As a tire’s width increases, it covers more surface area on the road. According to iSee Cars, this increase in contact with the pavement gives your vehicle more to hold onto, increasing its handling and ability to maneuver.

What size is best for street skating?

Wheels that are 54mm and under are usually best for street skating. Smaller wheels are ideally used for street skating because they’re light weight makes flipping your board a bit easier.

Should I get 57mm or 62mm skate wheels?

Wider, larger wheels (60mm-70mm) are great for outdoor traction and indoor speed. Smaller wheels (57mm) are needed for artistic or rhythm skating because while slower, they offer greater maneuverability.

Are 101A wheels too hard?

The harder smaller skateboard wheels are mostly between 97A and 104A. The most popular wheels in this category are 99A to 101A. Hard wheels have a very slippery, plasticy feel. They are smooth and fast on smooth surfaces, but are chattery and unpleasant to ride on rough terrain.

What is the most common skate size?

7.5″ to 8″
7.5″ to 8″ – Standard deck size for most riders skating streets or doing more technical tricks with a shoe size of 11 or less.

What wheels do pro street skaters use?

In terms of wheel shape, there’s classics, radials, conicals, and conical full among others. Most pro street skaters choose classics as they’re narrow and slide insanely well. However, some skaters like their wheels a little wider than classic. That’s why they may go for conicals.

Are 52mm wheels good for tricks?

Small Wheels Between 48 MM and 52 MM
Smaller wheels are best for street skating. They are great for tricks and grinding without getting your wheels stuck. Not only street, they perform well in skate parks and mini ramps or smaller bowls.

What wheel size is best for street racing?

The best practice is to go with a smaller wheel for performance and as much tire as you can fit to get the most traction possible. On average, you will see the best results with wheels for the front that are in the 15×3.75-inch range or larger, and in the rear a set of wheels in the 15×10-inch range is ideal.

Is it easier to turn a big or small wheel?

So, increasing your wheel size will decrease the driving force from your wheels which will culminate in a decrease in acceleration of said wheels. To summarise, a car’s engine finds it more difficult to rotate larger wheels, making for a decrease in overall acceleration.

Can you put 70mm wheels on a regular skateboard?

You can put longboard wheels on a skateboard but they can’t be bigger than 70mm. You need to attach 1/2“ riser pads and 1 1/2″ bolts to keep enough clearance or else you get wheel bite.

Are 52mm wheels good for beginners?

The 52mm wheel size is a great option for street skating. They offer good speed and maneuverability, and can handle rough terrain well. However, they may not be the best choice for beginners, as they can be difficult to control. If you’re just starting out, you may want to consider choosing a smaller wheel size.