100-watt Marshall amplifier.
The song was played with a Gibson ES-335 (as well as a Fender Stratocaster) through a B. K. Butler Tube Driver and an Echoplex plugged into a 100-watt Marshall amplifier.
What amp does Eric Johnson use for Cliffs of Dover?
This studio rig was relatively simple, mainly employing a Maestro EP-3 Echoplex, Paul C.’s/Chandler Tube Driver and a 100-watt Marshall half stack.
What scale does Cliffs of Dover use?
Cliffs of Dover is written in the key of G Major. According to the Theorytab database, it is the 3rd most popular key among Major keys and the 3rd most popular among all keys. Major keys, along with minor keys, are a common choice for popular songs.
What amp did Peter Green use with the Bluesbreakers?
1964 Marshall JTM45 4×10
That’s the case with this month’s featured amp: a 1964 Marshall JTM45 4×10 combo that was owned and played by Peter Green during his years with Fleetwood Mac, and potentially with John Mayall’s Bluesbreakers.
What kind of amp did Eric Johnson use?
Fender Twin Reverb amps
For his clean rhythm sound, Johnson has long used a pair of Fender Twin Reverb amps. Typically he uses heads, which he connects up to a 4 x 12″ Marshall cabinet. He uses two speakers for each amp, and runs them in stereo. Until recently, he used a 1968 Marshall Plexi amp for his dirty rhythm sound.
What amp did Van Halen use in Van Halen 1?
1967/68 Marshall 1959 Super Lead
This Marshall amp was used for the first six Van Halen albums. There are many rumours and myths surrounding this amp and it’s famous “Brown sound”. The amp was bought second hand and imported to the US from England.
What amp did Merle Haggard use?
Guitar.com: What kinds of amps are you using? Haggard: I use two Fender Twin Bassman amps, and that’s about all I need.
What key and scale is Cliffs of Dover?
The album version of the song is composed in the key of G major. The song was played with a Gibson ES-335 (as well as a Fender Stratocaster) through a B. K. Butler Tube Driver and an Echoplex plugged into a 100-watt Marshall amplifier.
What guitar grade is Cliffs of Dover?
“Well it has got two F-Holes!” I’d put it in intermediate to intermediate-advanced because of the hybrid picking. But there’s no point in getting hung up on whether a song is difficult or not.
What scales did Eric Johnson use?
The scale type that Eric is most known for using is without doubt the pentatonic scale – both the minor 1 b3 4 5 b7 1 and major 1 2 3 5 6 1 versions. One of the aspects that he is renowned for is his usage of odd note groupings.
What amp did Eric Clapton use on Bluesbreakers?
1962 Marshall 2×12 combo
While in John Mayall’s Blues Breakers, Eric Clapton played a 1960 model Les Paul Standard through a 45-watt model 1962 Marshall 2×12 combo (JTM 45). The amp was stock except that the output tubes were replaced with KT66s which have a more refined mid-range and clearer top end than either EL34s or 6L6s.
What amp did Scotty Moore use?
But it was the sound of Moore’s fat-bodied Gibson guitars—early on, an ES-295—that first boomed out of radios across the U.S., soaked in the slapback echo Phillips put on his studio tracks. To duplicate the sound live, Moore, again following Atkins’ lead, used a Ray Butts EchoSonic amp, which had a built-in tape unit.
What amp did Andy Summers use?
During the Police years, Andy Summers played two 100-Watt Marshall heads, acquired in the late ’70s, with two 4×12 Marshall speaker cabinets. Those amps either could be the Marshall JMP 1959 Super Lead, or 1992 Super Bass.
What amps did Def Leppard use?
Amps and Effects
- Loop 1 – Marshall JMP-1 MIDI preamp.
- Loop 2 – Voodoo Amps VC-2 preamp.
- Loop 3 – Rocktron Intellifex (used only for chorus)
What amp did Steve Clark use?
Marshall JCM series amps
Clark’s amplifiers consisted mostly of Marshall JCM series amps as heard on the first three Def Leppard albums.
What amp did Elvis use?
Benson 200 amplifier
During the two stand up live performances taped at NBC’s Burbank studio on June 29, 1968 the amplifier used with Al Casey’s Hagstrom was his Benson 200. ** Al said “once Elvis had a guitar to play, he needed an amp to play it through, and the Benson is what I had wit…
What amp did Stevie Ray Vaughan use?
Fender Vibroverb amplifiers
The amplifiers he used on stage included: Two “Blackface” Fender Super Reverbs. Marshall Club & Country combo amp with 2×12″ JBL speakers. Two 1964 “Blackface” Fender Vibroverb amplifiers (numbers five and six off production line), each with one 15″ speaker.
What amp did Pete Townshend use?
Fender Vibro-King amps
Still, Townshend wasn’t crazy about the Marshall heads for long. Nowadays, Townshend prefers Fender Vibro-King amps with a 2×12 extension cab underneath. Interestingly enough for a player that commands such powerful noise, he also keeps the volume around 3.
What amp did Carlos Santana use?
For more than five decades, Santana has continued to use the amplifiers. It is only recently that he has incorporated Dumble amplifiers into his gear. He uses a Jim Dunlop Amp Switcher to move back and forth between those two models, as well as a Fender Twin Reverb.
What amp did Muddy Waters use?
1965 Fender Super Reverb
Muddy had used a variety of small amps in his early years before finally settling on a silverface 40-watt Super Reverb in the mid 60’s. This would be his primary amp for years to come.
What amp did Smashing Pumpkins use?
The Smashing Pumpkins used Marshall amps and cabinets almost exclusively in the early to mid-90s. JCM800s were used heavily by both Corgan and Iha when recording Gish and Siamese Dream, using its famously crunchy-sounding distortion for rhythm tracks on their debut in particular.