What Effects Does Eric Johnson Use?

Johnson is known to use an overdrive (with gain and volume on the shy side) for his “break up” or “dirty” rhythm set-up and a vintage Dallas-Arbiter Fuzz Face, Maestro Echoplex and a modern octave fuzz on his third (and lead) amplifier. He is also rumored to keep his treble as low as 2, if not 0.

What pedals did Eric Johnson use?

One of the most important guitar pedals to consider if you want to sound like Eric Johnson, is the Tube Driver, by B.K. Butler. Johnson has used this consistently throughout his career and it has played a key role in helping him to craft his searing lead tones.

What effects are used in Cliffs of Dover?

For Cliffs of Dover, he used his lead setup exclusively, which is dialed in to provide a sweet, sustaining tone with a smooth, non-percussive attack resembling the sound of a bowed violin.

Does Eric Johnson use reverb?

Eric Johnson runs his rhythm circuits through a pair of Fender Twin Reverb amplifiers. Johnson’s settings are “pretty much the same all the time,” he says in this Premier Guitar interview at (5:17). “I might mess with the treble a little bit,” he said.

What effects do Korn use?

Modulation is another key ingredient of the Korn sound, with Munky and Head using chorus, flanger, phaser and univibe pedals to attain creepy and unsettling sounds. They usually achieve this by setting their rate/time controls to be fast, thus creating a sinister-sounding warble.

Does Eric Clapton use effects pedals?

Unlike a lot of musicians out there, Eric doesn’t tend to rely on many pedals to achieve his tone. Throughout the years chorus and distortion pedals have come and gone, but for the most part distorted tones have come straight from the amp and the guitar.

What distortion does Eric Johnson use?

Johnson is known to use an overdrive (with gain and volume on the shy side) for his “break up” or “dirty” rhythm set-up and a vintage Dallas-Arbiter Fuzz Face, Maestro Echoplex and a modern octave fuzz on his third (and lead) amplifier. He is also rumored to keep his treble as low as 2, if not 0.

What guitar cable does Eric Johnson use?

1968 Marshall Super Lead 100W
Eric likes to use a Y cable that allows him to plug into both channels of the amp at once, which makes it sound a lot hotter.

What guitar grade is Cliffs of Dover?

“Well it has got two F-Holes!” I’d put it in intermediate to intermediate-advanced because of the hybrid picking. But there’s no point in getting hung up on whether a song is difficult or not.

What tuning is Cliffs of Dover in?

The album version of the song is composed in the key of G major. The song was played with a Gibson ES-335 (as well as a Fender Stratocaster) through a B. K.
Cliffs of Dover (composition)

“Cliffs of Dover”
Single by Eric Johnson
Length 4:10 6:15 (combined with “Ah Via Musicom”)
Label Capitol Records
Songwriter(s) Eric Johnson

Does ACDC use reverb?

While a lot of AC/DC’s guitar tracks could be described as bone-dry, they have used reverb used on tracks like Highway To Hell, You Shook Me All Night Long and If You Want Blood (You’ve Got It) – perhaps most noticeably on intros, or any parts with the guitar unaccompanied, and solos.

Did Van Halen use reverb?

Early Reverberations… If you’ve ever listened to the first Van Halen album on headphones, then you’ll notice that the guitar is panned hard left with the reverb panned hard right (except for “Eruption”).

Did SRV use Twin Reverb?

For his 1985 Japan tour, Vaughan used a pair of Fender Twin Reverb amps (a mid Sixties 85-watt blackface model and a late Seventies 100-watt silverface version with master volume) in place of his Dumble Steel String Singer head.

What effects does Kirk Hammett use?

Kirk has been using Dunlop wah’s for his entire career. The wah sound is so associated with him that he eventually got his own signature wah pedal, the Dunlop KH95 Kirk Hammett Wah. It’s inspired by the classic Dunlop Cry Baby Wah, but has some cool graphics to make it unique.

What effects does John Mayer use?

When it comes to boost pedals, Mayer really only uses two. The first is a Keeley Katana Clean Boost, which is a $169 pedal that provides a really transparent volume boost and is very simple to operate. The second boost pedal that he uses is a Strymon OB. 1, which is actually a clean boost and compressor pedal.

What effects does Ed Sheeran use?

The best way to replicate Sheeran’s sound is to use the Boss RC30 loop station. This is the pedal that Ed Sheeran used before the Chewie II was built, and could be seen at many of his older live performances.

What effect pedals did Jimi Hendrix use?

Jimi favoured Vox wah-wah pedals, and you can hear them on many of his most favourite songs including Purple Haze and Voodoo Child (Slight Refrain). Though there are a number of Vox wah pedals still made to this day, the V847A pedal is arguably the closest to the ones used regularly by Hendrix throughout his career.

What pedal does ACDC use?

JOYO High Gain Distortion guitar pedal, get the kind of hard distortion used by the bands you love-from the crunch of AC/DC to the heavy metal of Metallica. With a full range of EQ adjustment and tone control, from a little blues rock crunch to an all out snarling distortion this is one versatile pedal.

What pedals did Stevie Ray use?

from 1989 until his death. Stevie initially used Roger Mayer Octavia pedals, but when Diaz located three New Old Stock Tycobrahe Octavia pedals, he switched to those. His guitar tech, Rene Martinez, says that Stevie thought the Tycobrahe pedal produced the best Octavia effect he had ever heard.

What distortion settings did Kurt Cobain use?

Cobain’s distortion primarily came from a Boss DS-1 distortion, then later from a Boss DS-2 Turbo distortion.

What distortion did David Gilmour?

Fuzz Distortion. Fuzz distortion is an important component of David Gilmour’s tone. In the 60s, fuzz distortion was common as there weren’t many distortion or overdrive options available.