Like most Mopars from the late 1960s and early 1970s, the fifth-generation Plymouth Fury was optionally available with the massive 440-cubic-inch (7.2-liter) RB V8 engine. However, Plymouth did not offer the full-size with the 426-cubic-inch (7.0-liter) Hemi mill.
What engine was in the Plymouth Fury?
Engine offerings included a standard 360 cu in (5.9 L) V8 with two-barrel carburetor on sedans and coupes, a two-barrel 400 cu in (6.6 L) V8 standard on wagons and optional on other models, and four-barrel carbureted 400 and 440 cu in (7.2 L) V8s optional on all models.
What engines were available in 1964 Plymouth Fury?
Under the hood, engine choices ran the gamut, from the 225-cid, 145-hp slant-six to the 383-cid, 330-hp “Sonoramic Commando V-8. Transmission choices were limited to a three-speed manual or an automatic.
What engine was in the 1967 Plymouth Fury?
Engines ranged from the 225-cid slant-6 to the 426-cid, 425-hp Max Wedge mill, though most cars had 318-cid, 361-cid, and 383-cid V-8s. All Furys of this era had a square body with vertically stacked double headlights.
What engine was in the 1958 Fury?
Golden Commando V-8 engine
The 1958 Plymouth Fury featured a Golden Commando V-8 engine.
Was the Plymouth Fury fast?
PHOTOS: See More of the 1958 Plymouth Fury
The Ford limped in behind the other two, finishing in 10.2 seconds. The fastest ones achieved speeds in excess of 143 miles per hour, allowing it to easily dominate virtually any other car on the street or at the race track.
How many Plymouth furys are left?
Today, there are three remaining “Christines.” One was sent to the U.K, while the other, one of the stunt cars, was purchased and restored by Martin Sanchez (via Wired). The lone Plymouth Fury Christine was originally raffled off and won by Scott Edminster, who eventually sold it.
What engine is in a 1965 Plymouth Fury?
The 1965 Plymouth Sport Fury came standard with a 318 cubic-inch V8 and a 3-speed manual transmission. For drivers wanting additional performance, a Commando 383 or Commando 426 were available. Horsepower for these Commando engines ranged from 270 to 365 horsepower.
What Motor came in a 1966 Plymouth Fury?
Engines ranged from the 225-cid slant-6 to the 426-cid, 425-hp Max Wedge mill, though most cars had 318-cid, 361-cid, and 383-cid V-8s. All Furys of this era had a square body with vertically stacked double headlights.
How much is a 1964 Plymouth Sport Fury worth?
VIN Decoder
**Figure based on a stock 1964 Plymouth Sport Fury valued at $22,800 with ON rates with $100/300K liability/UM/UIM limits. Actual costs vary depending on the coverage selected, vehicle condition, province and other factors.
What did GTX stand for on Plymouth?
Grand Touring Extra
So then, what does GTX stand for in cars? According to the late Jack Smith of Plymouth- The X is only a letter that was added to make their version of GTO. This means that GTX doesn’t stand for anything specific in cars. However, based on today’s trim specifications, you could interpret it as Grand Touring Extra.
How fast was a 1957 Plymouth Fury?
115 mph
The glory days of Chrysler’s performance cars was still some years away, but the seeds were clearly to be seen here in the Fury. The Fury had a healthy top speed; some 115 mph as tested with a one-mile approach. 125 mph was estimated to be its potential with enough distance to get there.
Is a Plymouth Fury a muscle car?
The biggest cars in the Chrysler stable have some of the smallest prices, and with average values ranging from $6700 for base models to $13,500 for higher trims, the 1965–68 Plymouth Fury is one of the most affordable machines of the muscle-car era.
What engines were available in a 1959 Plymouth Fury?
1959 Plymouth Sport Fury Powertrains
A 230-hp 318 V8 with a two-barrel carburetor was standard. A four-barrel equipped variation of the same 318 cubic-inch V8 was also offered, bumping horsepower up to 260. But, at the top of the lineup was the Golden Commando 361.
What is the difference between a 1958 Plymouth Fury and Belvedere?
Fury’s trademark upswept side spear was shared with the Sportone Belvedere, the difference being that the Fury’s trim was gold anodized. Other anodized gold trim included the grille and hubcap centers. Inside, a custom two-tone beige, cocoa, and gold interior replaced the previous gold on white.
How much did a 1958 Plymouth Fury cost new?
In 1958, they came in buckskin beige. This first generation of Plymouth Fury was a special trim level of the Belvedere with an MSRP of $3,067.
How much is a Plymouth Fury worth?
A: The average price of a Fury is $33,761.
What engine was in Christine?
Golden Commando V-8
Caldwell said Christine has the correct motor, a 350 cubic inch, 305 horsepower Golden Commando V-8 topped by two four-barrels, and backed up with the correct TorqueFlite three-speed automatic transmission.
How much horsepower does a 1958 Plymouth Fury have?
Two Carter four-barrels were on top, compression was 10:1 and the advertised horsepower rating was 305.
How many cars destroyed making Christine?
There were between 13 and 16 (depending on source) Belvederes/Furys smashed in the making of the movie (out of the roughly 25 used), but it is unknown whether they were 1957 or 1958 models, or a combination.
Was Christine a 57 or 58 Plymouth Fury?
Although the the movie “Christine” included a 1958 Plymouth FuryOpens a new window as its main character, the film interchanged the vehicle with 1957 Fury cars and other Chrysler models. All vehicles shared similar characteristics and were highlighted in the movie based on Stephen King’s thriller novel.