In the midst of the first oil crisis, 1974 would be the Duster’s best sales year, with a total of 281,378 Duster-bodied cars produced, the majority of which being the six-cylinder and 318 V8 models.
Did a Duster ever come with a 440?
Sure, they didn’t pack 440 or 426 power, but they also weighed less than the B-body Road Runner and Satellite and make an excellent platform for a street or strip car. Like plenty of other budget-minded cars of the era, the Duster has been dismissed by many collectors who demand only the meanest muscle cars.
How fast was a 1970 Plymouth Duster 340?
That new car was the Valiant Duster 340. The 3,105-pound, semi-fastback coupe could cover the quarter mile in 14.72 seconds at 94.24 mph, according to a March 1970 road test in Car Life.
What engine is in a 1975 Plymouth Duster?
The Duster came with a choice of four powerplants—two slant-sixes with either 198 or 225 cid, and two V-8s with 318 or 340 cid. Power ranged from 125 hp in the small slant-six to 275 hp in the high-performance Duster 340.
What was the best year for the Plymouth GTX?
Car and Driver said the 1967 GTX “is without a doubt the best-handling big Plymouth yet”. And who could argue? With a 0 to 60 time of 6.0 seconds and a quarter mile run time of 14.4 seconds, the 440 Super Commando GTX had what it took to take on the Pontiac GTO and Ford Fairlane.
How much horsepower did a 440 Six Pack produce?
390 horsepower
The factory rated the 440 Six Pack at 390 horsepower and 490 lb-ft.
How much horsepower did a 1971 440 have?
370 hp
Note: 1971 440 Magnum horsepower dropped 5 hp from 375 in 1970 to 370 hp in 1971 due to lower engine-compression features to meet (at the time) current emission requirements.
What was the most powerful engine in 1970?
The Ultimate Muscle Car – The 1970 LS6 Chevelle Was America’s King Of The Streets
- While the cars were tested with either four-speed or automatic transmissions, they did display similar times.
- The 450 horsepower LS6 was the most powerful engine offered in 1970.
What is a 1970 Duster worth?
$31,500
Detailing
Vehicle: | 1970 Plymouth Duster |
---|---|
SCM Valuation: | $31,500 (1971 Demon 340) |
Tune Up Cost: | $250 |
Chassis Number Location: | Dashboard, decal on driver’s door, fender tag |
Engine Number Location: | Partial VIN on block above oil-pan rail |
How many horsepower did a 340 Duster have?
Plymouth Duster 340 279 hp – Specs & performance.
What is a 1974 Plymouth Duster worth?
It’s more like a Faded Yellowish Duster today. A Gold Duster with the base 198-cubic-inch Slant-6 engine and 3-speed manual transmission listed at $3,016 in 1974, which comes to just under $15,000 in inflation-adjusted 2017 dollars.
How fast is a Plymouth Duster?
With the optional 275-horsepower 340 V8 a relatively lightweight Duster offered very spirited performance. Contemporary road tests saw 0-60 mph times in a little over six seconds and the standing quarter mile in the mid-14 seconds range.
Was the Plymouth Duster a muscle car?
Introduction: The Plymouth Duster debuted for 1970 as a performance version of the Plymouth Valiant. Providing tremendous bang for the buck with its performance 340 V8, the little Duster put many bigger muscle cars to shame.
What is the rarest Plymouth?
1954 Plymouth Explorer dream car
This 1954 Plymouth Explorer dream car is officially the rarest Plymouth in the world – a title that only one vehicle can possess.
What does GTX stand for on a Plymouth?
Grand Touring Extra
So then, what does GTX stand for in cars? According to the late Jack Smith of Plymouth- The X is only a letter that was added to make their version of GTO. This means that GTX doesn’t stand for anything specific in cars. However, based on today’s trim specifications, you could interpret it as Grand Touring Extra.
What was the last Plymouth ever made?
The final Plymouth, a Neon, was assembled on June 28, 2001, at Belvidere Assembly Plant, with a total of 38,657 built for the model year.
Which is better 426 Hemi or 440?
The 440 is a better street engine and can be built to makes very good hp and tq . The 426 hemi needs to have forced air, like a turbo or blower too get the most out of it.
How much horsepower did the 426 Hemi really have?
MoPar 426 Hemi
The 426 street Hemi was rated at 425 horsepower from the factory. This Chrysler dyno sheet from decades ago and this close-to-stock dyno session of a new 426 Hemi both put the gross horsepower rating at about 470 horsepower without full exhausts and other engine-driven accessories.
What is a 426 Hemi worth?
In terms of cars for sale that contain the infamous 1970 426 Hemi engine, there are a variety of cars to choose from ranging from roughly $70,000 all the way to $300,000, with some insanely rare models fetching all the way up to $2.6 Million; a 1970 Plymouth Hemi ‘Cuda Convertible of which there were only five ever
What’s the difference between a 383 and a 440?
The major difference between these two Mopar legends is the deck height of the block: 9.98-inch for the 383 and 10.725-inch for the 440.
What was the last year for the 440 engine?
1978
The 440 cu in (7.2 L) RB was produced from 1965 until 1978, making it the last version of the Chrysler RB block.